Boners - Automatic Penis Pump With Masturbator

Boners Automatic Penis Pump With Masturbator

This isn't just a pump — it's a pump with benefits. The motorized vacuum system does the work for you, creating steady, controlled pressure without the manual effort. Add the soft TPE sleeve inside the cylinder, and you get a product that combines temporary engorgement with genuine stimulation during the session. The transparent ABS cylinder shows you exactly what's happening, with measurement markings so you can track your progress and find a routine that works.

It's rechargeable, replaceable, and built for men who want results and sensation in the same tool.

Will You Fit?

The cylinder has an internal diameter of 6 cm — roughly the width of a standard drinks can — and an insertable length of 19 cm. Most men will fit comfortably, but if you're significantly above average in girth, you may feel restricted. The sleeve adds about 1 cm of material around the walls, so the effective space is slightly narrower than the hard cylinder itself.

If you're unsure, measure yourself when erect: wrap a soft tape measure around the thickest part. If you're over 5.5 cm in diameter, you'll have room to grow. If you're already at 6 cm or above, consider a larger-diameter pump without the sleeve insert.

How It Works

The motorized pump creates a vacuum inside the sealed cylinder, drawing blood into the penile tissue and causing temporary engorgement. You control the pressure with a button — press to pump, release to vent. The sleeve adds friction and a massage-like sensation as the vacuum pulls you deeper into the cylinder, turning a purely mechanical process into something that feels more intimate.

This is a 2-in-1 design: you get the physiological benefit of increased blood flow and the psychological boost of arousal and stimulation. For men dealing with erection anxiety or inconsistent hardness, that combination can be genuinely helpful.

Pressure & Control

Start slow. The motor is efficient, and vacuum builds faster than with manual pumps. Press the button in short bursts and give your body time to adjust — you should feel a firm pull, not pain. If it starts to hurt, vent immediately using the release function.

The cylinder has no pressure gauge, so you'll need to rely on sensation. A good rule: if it feels uncomfortable, it's too much. Sessions should last 10–15 minutes maximum. Over-pumping doesn't lead to better results — it leads to bruising, burst capillaries, and a disappointing few days of downtime.

The quick-release valve lets you drop pressure instantly if something feels wrong. Always release the vacuum fully before removing the cylinder from your body.

What to Expect

You'll see an immediate increase in size and firmness during and right after pumping. This is temporary engorgement, not permanent growth. The effect typically lasts 30 minutes to an hour, depending on your body and how much you move around afterward.

With consistent use — 3–5 times per week over several months — some men report improved baseline firmness and slightly better erection quality. This isn't magic; it's conditioning. The vacuum encourages blood flow, and regular sessions can support healthier tissue elasticity over time.

If you want to extend the effect post-pump, slip on a snug penis ring before releasing the vacuum. This traps the blood and keeps you fuller for longer — useful if you're heading into a situation where you want that extra confidence.

Maintenance & Safety

Hygiene is non-negotiable. After every session, remove the motor head, pull out the TPE sleeve, and rinse both the cylinder and sleeve in warm water. Spray with antibacterial toy cleaner, let it sit for the recommended time, then rinse again. The motor unit should never be submerged — wipe it down with a damp cloth and a bit of toy cleaner on the fabric, not directly on the device.

Dry everything thoroughly before reassembly. Moisture trapped inside the sleeve or cylinder creates a breeding ground for bacteria and unpleasant smells. Let the parts air-dry completely, then store them separately in a cool, dry place away from direct sunlight.

Use water-based lubricant only. It creates a better seal against your body, feels more natural, and won't degrade the TPE sleeve. Oil-based lubes will break down the material and shorten its lifespan.

If the sleeve starts to feel sticky, loses its shape, or develops cracks, replace it. If the vacuum doesn't hold as well as it used to, check the seals and connections. Keep the battery topped up via USB so the motor is ready when you are.

How to use a Boners - Automatic Penis Pump With Masturbator?

It may at first seem a little difficult to use a penis pump, but it is actually very, very easy to use a Boners - Automatic Penis Pump With Masturbator when you get to try it.

Begin by placing the tube of the pump over the ding penis. You can use a good lubricant to avoid irritation from the tube itself. Then turn on the pump (if automatic) or use the hand pump to remove air in the pipe and create a vacuum.

This vacuum makes your penis bigger and provides a blood flow that gives you a much stronger erection. It now only takes a few minutes for you to achieve a powerful erection.

Should you also use a penis ring?

A penis ring is made to help maintain your erection by restricting blood flow from that penis.
When you have achieved a powerful erection, you can place a cock ring around the root of your penis - this will help create the powerful erection.

What other advantages are there to a penis pump like Boners - Automatic Penis Pump With Masturbator?

Keep It Fresh (and Working Like New)

Your Boners Automatic Penis Pump With Masturbator is part tech, part pleasure—so a little care goes a long way. Clean it after every use to keep things hygienic, comfortable, and ready whenever you are.

Cleaning After Each Use

Take it apart first

Disconnect the motor/pump head from the cylinder, then remove the TPE sleeve. This makes it easier to clean every surface that matters.

• Cylinder (ABS): Rinse, then clean with Mshop Clean:IT. Wipe or rinse again as needed.
• Masturbation sleeve (TPE): Clean thoroughly with Mshop Clean:IT, paying extra attention to any texture where residue can hide.
• Motor/pump head: Do not submerge. Wipe it with a lightly damp cloth, then use Mshop Clean:IT on the cloth (not sprayed directly into openings).

Drying & Storage

Dry everything with a clean towel, then air-dry completely before reassembling or storing. Moisture trapped inside the sleeve or cylinder can cause odors and shorten the life of the materials.

• Store in a cool, dry place away from direct sunlight and heat.
• Keep the sleeve separate from other toys/materials to help prevent material reactions over time.

Lube & Material Notes

For comfort and a reliable seal, stick to water-based lube. It’s the best match for the TPE sleeve and helps everything glide smoothly without stressing the material.

Quick Safety & Wear Checks

If you notice cracks, cloudy damage to the cylinder, or tears/stickiness in the sleeve, it’s time to replace the worn part. A good seal should feel secure—never painful.

Tip: Keep the device charged via USB so it’s always ready for hands-free sessions (and no last-minute battery drama).